New
Guides
How to applyyour henna.
A little care makes a deeper stain. Choose your cone for step-by-step instructions.
- 1
Ensure hands are clean and free from any lotions or creams.
- 2
For optimal results, allow the paste to remain on the skin for a minimum of 7 hours.
- 3
To remove the paste, gently scrape it off using oil and a butter knife. Avoid washing the area.
- 4
Minimise water contact for up to 12 hours.
The stain deepens over the next two days.
- 1
Apply a thin to medium layer over the nail.
- 2
Allow the henna to dry until touch-proof.
- 3
Tape the nail and keep it on for 5 to 7 hours, keeping warm.
- 4
Wash off with warm water.
See our Instagram for a detailed taping tutorial.
- 1
Apply with minimal pressure to the skin.
- 2
Jagua stains rapidly, so take care while applying.
- 3
For optimal results, keep the paste on the skin for a minimum of two hours.
- 4
Remove the paste with lukewarm water, gently rubbing with your fingertips. Avoid hot water and scratching.
- 5
Minimise water contact for up to 12 hours.
Work slowly: Jagua stains the moment it touches skin.
- 1
Ensure hands are thoroughly cleaned and free of creams or lotions.
- 2
After applying, leave the paste on the skin for a minimum of 2 hours.
- 3
Scrape the paste off, then avoid water contact for at least 12 hours.
- 4
Avoid excessive heat and steam for at least 48 hours after applying.
It's not instant. Give it two days to reach its full colour.
Ready to start?
